Contact Supplier
Mr. Mr.Liu
Leave a message Mr. Mr.LiuWhat can I do for you?
ShenZhen Fahold Electronic Limited
| Payment Type: | L/C,T/T,Paypal |
|---|---|
| Incoterm: | FOB,CIF,EXW |
| Min. Order: | 500 Bag/Bags |
| Delivery Time: | 15 Days |
Basic Info
Model No.: HR100W-02-24V
Output Type: Single
Warranty: 5 Years
Output Power: 51 - 100W
Input Voltage: Full Range
Connection Mode: Parallel Switching Power Supply
Starting Mode: Separate-excited Switching Power Supply
Voltage Regulating Mode: Frequency Modulation Type
Power Supplying System: Terminal Power Distribution Equipment
Energy Transmission: One-way Transmission
Modulation System: PWM
Certification: FCC
Power Factor: >0.9
THD: <15%
Dimension: 378x28x39mm
Current Accuracy: + -5%
Current Range: 4200mA
Additional Info
Packaging: 30PCS/CARTON
Productivity: 200 thousands pcs
Brand: Fahold
Transportation: Ocean,Air
Place of Origin: Guangdong, China
Supply Ability: 200000pcs
Certificate: ISO9001
HS Code: 8504401400
Port: Yantian
Product Description
Product description:
• Output voltage 24 V
• Max. output power 100 W
• Dimmable via PWM/0-10V/RX/Dali LED dimmers
• Nominal life-time up to 50,000 h
• 5-year guarantee
Typical application
• Cove lighting, facade accent lighting, ceiling integration,linear lighting.
Technical details
• 24 V, 100 W
• Very good THD performance in wide load range < 5 %
• Ripple and Noise 0.36V p-p
• Small cross section
• Push terminal for simple wiring
Wiring guidelines
• The cables should be run separately from the mains connections and
mains cables to ensure good EMC conditions.
• The LED wiring should be kept as short as possible to ensure good EMC.
The max. secondary cable length is 2 m (4 m circuit).
• The LED Driver has no inverse-polarity protection on the secondary side.
Wrong polarity can damage LED modules with no inverse-polarity protection.
• Wrong wiring of the Led Driver can lead to malfunction or irreparable
damage.
Earth connection
The earth connection is conducted as protection earth (PE). The LED Driver can be earthed via metal housing. If the LED Driver will be earthed,protection earth (PE) has to be used. There is no earth connection required for the functionality of the LED Driver. Earth connection is recommended to improve following behaviour:
• Electromagnetic interferences (EMI)
• LED glowing at standby
• Transmission of mains transients to the LED output
In general it is recommended to earth the LED Driver if the LED module is mounted on earthed luminaire parts respectively heat sinks and thereby representing a high capacity against earth.
Product Categories : Constant Voltage Led Driver > Constant Voltage 12/24V Led Linear Driver
