Lighting Design Led Driver,LED Linear Pendant Light,CV LED Linear Light
ShenZhen Fahold Electronic Limited[Guangdong,China] Business Type: ManufacturerMain Mark: Americas , Asia , Europe , North Europe , WorldwideExporter: 41% - 50%Certs: CB, CE, FCC, GS, RoHS, S-Mark, SSA, Test Report, TUV, ULDescription: Lighting Design Led Driver,LED Linear Pendant Light,CV LED Linear Light
Starting Mode: Separate-excited Switching Power Supply
Voltage Regulating Mode: Frequency Modulation Type
Power Supplying System: Terminal Power Distribution Equipment
Energy Transmission: One-way Transmission
Modulation System: PWM
Certification: CE, UL, RoHS, ISO, CCC, CB, FCC
Power Factor: >0.9
Current Accuracy: + -5%
Current Range: 4200mA
Productivity: 200 thousands pcs
Place of Origin: Guangdong, China
Supply Ability: 200000pcs
HS Code: 8504401400
High quality level Led Driver, HR60W-02-24 is a 60W 24Vdc 0-10V/PWM/Dali Dimming Constant Voltage Led Driver with 100-277Vac input and IP20 rating for indoor use. This constant voltage 0-10V/PWM/DALI Dimming Led Driver is capable of 0-100% of load dimming. The Linear iron case is fully isolated and fire resistant, with screw terminals for easy installation.
• Very good THD performance in wide load range < 5 %
• Ripple and Noise 0.18V p-p
• Small cross section
• Push terminal for simple wiring
• Dimming Range 0-100%
• The cables should be run separately from the mains connections and
mains cables to ensure good EMC conditions.
• The LED wiring should be kept as short as possible to ensure good EMC.
The max. secondary cable length is 2 m (4 m circuit).
• The LED Driver has no inverse-polarity protection on the secondary side.
Wrong polarity can damage LED modules with no inverse-polarity protection.
• Wrong wiring of the LED Driver can lead to malfunction or irreparable
The earth connection is conducted as protection earth (PE). The LED Driver can be earthed via metal housing. If the LED Driver will be earthed,protection earth (PE) has to be used. There is no earth connection required for the functionality of the LED Driver. Earth connection is recommended to improve following behaviour:
• Electromagnetic interferences (EMI)
• LED glowing at standby
• Transmission of mains transients to the LED output
In general it is recommended to earth the LED Driver if the LED module is mounted on earthed luminaire parts respectively heat sinks and thereby representing a high capacity against earth.